Start off by getting the sourcecode from http://nginx.org/en/download.html
wget http://nginx.org/download/nginx-0.7.64.tar.gz
Extract it
tar xvf nginx-0.7.64.tar.gz
Install header rewrite, http cache modules dependency
sudo apt-get install libpcre3 libpcre3-dev libssl-dev
Configure, compile and install
cd nginx-0.7.64 ./configure && make && make install
If you want to follow the ubuntu/debian style paths:
sudo ln -s /usr/local/nginx/conf /etc/nginx
And change config to include sites-enabled
sudo nano /etc/nginx/nginx.confAdd this under http {} directive:
include /etc/nginx/sites-enabled/*;
Example config to serve static files:
mkdir /etc/nginx/sites-enabled sudo nano /etc/nginx/sites-enabled/default
server {
listen 8081;
server_name localhost;
set $myroot /var/www;
# Base config
root $myroot;
location / {
index index.php index.html index.htm;
}
# Enable PHP
location ~ \.php$ {
root $myroot;
fastcgi_pass 127.0.0.1:9000;
fastcgi_index index.php;
fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
include /etc/nginx/fastcgi_params;
}
# If the file exists as a static file serve it directly without
# running all the other rewite tests on it
if (-f $request_filename) {
break;
}
}
To make nginx start at boottime, create an init.d script
sudo nano /etc/init.d/nginx
Init script I borrowed from: http://articles.slicehost.com/2008/5/13/ubuntu-hardy-adding-an-nginx-init-script
#! /bin/sh
### BEGIN INIT INFO
# Provides: nginx
# Required-Start: $all
# Required-Stop: $all
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: starts the nginx web server
# Description: starts nginx using start-stop-daemon
### END INIT INFO
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
DAEMON=/usr/local/nginx/sbin/nginx
NAME=nginx
DESC=nginx
test -x $DAEMON || exit 0
# Include nginx defaults if available
if [ -f /etc/default/nginx ] ; then
. /etc/default/nginx
fi
set -e
case "$1" in
start)
echo -n "Starting $DESC: "
start-stop-daemon --start --quiet --pidfile /usr/local/nginx/logs/$NAME.pid \
--exec $DAEMON -- $DAEMON_OPTS
echo "$NAME."
;;
stop)
echo -n "Stopping $DESC: "
start-stop-daemon --stop --quiet --pidfile /usr/local/nginx/logs/$NAME.pid \
--exec $DAEMON
echo "$NAME."
;;
restart|force-reload)
echo -n "Restarting $DESC: "
start-stop-daemon --stop --quiet --pidfile \
/usr/local/nginx/logs/$NAME.pid --exec $DAEMON
sleep 1
start-stop-daemon --start --quiet --pidfile \
/usr/local/nginx/logs/$NAME.pid --exec $DAEMON -- $DAEMON_OPTS
echo "$NAME."
;;
reload)
echo -n "Reloading $DESC configuration: "
start-stop-daemon --stop --signal HUP --quiet --pidfile /usr/local/nginx/logs/$NAME.pid \
--exec $DAEMON
echo "$NAME."
;;
*)
N=/etc/init.d/$NAME
echo "Usage: $N {start|stop|restart|reload|force-reload}" >&2
exit 1
;;
esac
exit 0
and
chmod +x /etc/init.d/nginx sudo update-rc.d nginx defaults
Installing php5 support
Install php5 with modules wanted
apt-get install php5-cgi php5-mysql php5-curl php5-gd php5-idn php-pear php5-imagick php5-imap php5-mcrypt php5-memcache php5-mhash php5-ming php5-pspell php5-recode php5-snmp php5-sqlite php5-tidy php5-xmlrpc php5-xsl
Set up FastCGI:
Install dependency
apt-get install libfcgi0ldbl
Paste the init script into
/etc/init.d/php-fastcgi
The init script: /etc/init.d/php-fastcgi
#! /bin/sh
### BEGIN INIT INFO
# Provides: php-fastcgi
# Required-Start: $all
# Required-Stop: $all
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: Start and stop php-cgi in external FASTCGI mode
# Description: Start and stop php-cgi in external FASTCGI mode
### END INIT INFO
# Author: Kurt Zankl <[EMAIL PROTECTED]>
# Do NOT "set -e"
PATH=/sbin:/usr/sbin:/bin:/usr/bin
DESC="php-cgi in external FASTCGI mode"
NAME=php-fastcgi
DAEMON=/usr/bin/php-cgi
PIDFILE=/var/run/$NAME.pid
SCRIPTNAME=/etc/init.d/$NAME
PHP_CONFIG_FILE=/etc/php5/cgi/php.ini
# Exit if the package is not installed
[ -x "$DAEMON" ] || exit 0
# Read configuration variable file if it is present
[ -r /etc/default/$NAME ] && . /etc/default/$NAME
# Load the VERBOSE setting and other rcS variables
. /lib/init/vars.sh
# Define LSB log_* functions.
# Depend on lsb-base (>= 3.0-6) to ensure that this file is present.
. /lib/lsb/init-functions
# If the daemon is not enabled, give the user a warning and then exit,
# unless we are stopping the daemon
if [ "$START" != "yes" -a "$1" != "stop" ]; then
log_warning_msg "To enable $NAME, edit /etc/default/$NAME and set START=yes"
exit 0
fi
# Process configuration
export PHP_FCGI_CHILDREN PHP_FCGI_MAX_REQUESTS
DAEMON_ARGS="-q -b $FCGI_HOST:$FCGI_PORT -c $PHP_CONFIG_FILE"
do_start()
{
# Return
# 0 if daemon has been started
# 1 if daemon was already running
# 2 if daemon could not be started
start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \
|| return 1
start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON \
--background --make-pidfile --chuid $EXEC_AS_USER --startas $DAEMON -- \
$DAEMON_ARGS \
|| return 2
}
do_stop()
{
# Return
# 0 if daemon has been stopped
# 1 if daemon was already stopped
# 2 if daemon could not be stopped
# other if a failure occurred
start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE > /dev/null # --name $DAEMON
RETVAL="$?"
[ "$RETVAL" = 2 ] && return 2
# Wait for children to finish too if this is a daemon that forks
# and if the daemon is only ever run from this initscript.
# If the above conditions are not satisfied then add some other code
# that waits for the process to drop all resources that could be
# needed by services started subsequently. A last resort is to
# sleep for some time.
start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
[ "$?" = 2 ] && return 2
# Many daemons don't delete their pidfiles when they exit.
rm -f $PIDFILE
return "$RETVAL"
}
case "$1" in
start)
[ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME"
do_start
case "$?" in
0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
esac
;;
stop)
[ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
do_stop
case "$?" in
0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
esac
;;
restart|force-reload)
log_daemon_msg "Restarting $DESC" "$NAME"
do_stop
case "$?" in
0|1)
do_start
case "$?" in
0) log_end_msg 0 ;;
1) log_end_msg 1 ;; # Old process is still running
*) log_end_msg 1 ;; # Failed to start
esac
;;
*)
# Failed to stop
log_end_msg 1
;;
esac
;;
*)
echo "Usage: $SCRIPTNAME {start|stop|restart|force-reload}" >&2
exit 3
;;
esac
Install it
sudo chmod +x /etc/init.d/php-fastcgi sudo update-rc.d php-fastcgi defaultsPlace the configuration for the script in
/etc/default/php-fastcgi
Config file for init script (the init script looks for this): /etc/default/php-fastcgi
START=yes # Which user runs PHP? (default: www-data) EXEC_AS_USER=www-data # Host and TCP port for FASTCGI-Listener (default: localhost:9000) FCGI_HOST=localhost FCGI_PORT=9000 # Environment variables, which are processed by PHP PHP_FCGI_CHILDREN=4 PHP_FCGI_MAX_REQUESTS=1000
Edit nginx config to make use of FastCGI
sudo nano /etc/nginx/nginx.conf
location ~ \.php$ {
root /var/www/nginx-default;
fastcgi_pass 127.0.0.1:9000;
fastcgi_index index.php;
fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
include /etc/nginx/fastcgi_params;
}
Config for fastcgi
/etc/nginx/fastcgi_params file
fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_param SCRIPT_NAME $fastcgi_script_name; fastcgi_param REQUEST_URI $request_uri; fastcgi_param DOCUMENT_URI $document_uri; fastcgi_param DOCUMENT_ROOT $document_root; fastcgi_param SERVER_PROTOCOL $server_protocol; fastcgi_param GATEWAY_INTERFACE CGI/1.1; fastcgi_param SERVER_SOFTWARE nginx; fastcgi_param REMOTE_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; fastcgi_param SERVER_ADDR $server_addr; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_NAME $server_name; # PHP only, required if PHP was built with --enable-force-cgi-redirect fastcgi_param REDIRECT_STATUS 200;
Setting up mod_rewrite and memcache
Uncomment to enable memcache
nano /etc/php5/conf.d/memcache.iniand restart php-fastcgi to enable config
sudo /etc/init.d/php-fastcgi restart
To rewrite edit nginx config:
# assume a clean URL is requested, and rewrite to index.php
if (!-e $request_filename) {
rewrite ^/(.*)$ /index.php?q=$1 last;
break;
}
No comments:
Post a Comment